X2 System is fully automated production system, which comes with below list of innovative features:
Model:
PinnacleFRAMER X2-18ga
Integrated Software:
Stud Track Framing: Truss Framing:
C+C or C+U
C+C In-Line
Number of Profile:
2 Dedicated Profiles Size.
Choice of 2 sizes between 50mm (2”) to 150mm (6”)
Standard Profile Sizes:
Metric Measurement:
50mm x 41mm x 8mm
60mm x 41mm x 8mm
75mm x 41mm x 13mm
90mm x 41mm x 13mm
100mm x 41mm x 13mm
140mm x 41mm x 13mm
150mm x 41mm x 13mm
Imperial Measurements:
2” x 1.62” (200S162)
2.5” x 1.62” (250S162)
3” x 1.62” (300S162)
3.5”x 1.62” (350S162)
3.62”x 1.62” (362S162)
4”x 1.62” (400S162)
5.5”x 1.62” (550S162)
6”x 1.62” (600S162)
Material Thickness:
25 gauge to 18 gauge (0.6mm to 1.2mm)
Roll Forming:
9 Stations, Auto-Gauging
Frame / Truss Punch Tools:
Truss Index hole punch
ID Printing System:
Inkjet Printer Fully Integrated for Profile Individual ID Marking
Standard Production Speed (Output):
Walls Frames: 500m/h to 900m/h ( 1,640 to 2,952 LF/hr ) Roof Truss: 300m/h to 500m/h ( 984 to 1,640 LF/hr ) Floor Truss: 200m/h to 300m/h ( 640 to 960 LF/hr )
Machine Maximum Line Speed:
Up to 2100m/h ( 6,890 LF/hr )
Main Drive System:
SERVO Driven High Speed System
Main Hydraulic System:
All Temperature Environment, High Power, High Speed System
Machine Length/Width/Height:
5000mm x 850mm x 1500mm ( 200” x 33.5” x 59.1” )
Weight (Approximate):
4500 kg (9900lb)
Power Consumption / Supply:
3 Phase 380 VAC 16 KW / 30 KVA (per client request)
Profile Receiving System:
Standard Run-out table
Powered De-Coiler:
1,500 kg (3,300lb) Powered Variable Speed Coil Feeding System
PinnacleFRAMER X2-16ga
• Structural Frame & Truss Design Production System
• World’s First & Only, Globally Patented
• PinnacleCAD Engineering Calculation
• PinnacleCAD 3D Modeling Detailing
• PInnacleCAD Machine Control Factory
Choice of 2 sizes between 75mm (3”) to 150mm (6”)
3”x 1.625” (300S162)
3.5”x 1.625” (350S162)
3.6”x 1.625” (362S162)
4”x 1.625” (400S162)
5.5”x 1.625” (550S162)
6”x 1.625” (600S162)
25 gauge to 16 gauge (0.6mm to 1.6mm)
• Truss Index hole punch
• Service hole punch
• Left / right lip notch punch
• Web notch punch
• Truss end cut punch
• Flange dimple connection hole punch
• Shear cut
• End crimp punch
• Auto swage
5000mm x 850mm x 1500mm (200” x 33.5” x 59.1”)
4800 kg (10500lb)
3 Phase 380 VAC 17 KW / 30 KVA (per client request)
· Maximum width: 300mm
· Maximum inner diameter: Ø450mm-520mm
· Maximum outer diameter: Ø1500mm