X20 System
- 20 Profile Sizes Capability with 2 Sizes Pre-Setup, Fixed Flange Height, Semi-Automated Size and Tooling Changeovers
- Fully Integrated Design to Production System for Entire Building Structural Requirement, Walls, Floors, Roofs
- One Platform Solution for Complete Structural Framing Requirements for Low-Rise, and 4 story Mid-Rise Building Construction
Table of Contents
- Specifications
- Applications
X20 System Specifications
| Model: | PinnacleFRAMER X20 Structural Frame & Truss Design Production System World’s First & Only, Globally Patented | |
| Integrated Software: | PinnacleCAD Engineering Calculation PinnacleCAD 3D Modeling Detailing PInnacleCAD Machine Control Factory | |
| Stud Track Framing: Truss Framing: | C+C or C+U C+C In-Line | |
| Number of Profile: | Any two profile web sizes between 40mm (1-1/2”) to 150mm (6”) | |
| Standard Profile Sizes: | Metric Measurement: | Imperial Measurements: |
| Material Thickness: | 25 gauge to 16 gauge (0.6mm to 1.6mm) | |
| Roll Forming: | ||
| Frame / Truss Punch Tools: | Service hole Lip cut left & right Web notch Truss cut Dimple-screw hole Swage Shear cut Crimp Index hole | |
| ID Printing System: | Inkjet Printer Fully Integrated for Profile Individual ID Marking | |
| Standard Production Speed (Output): | Walls Frames: 500m/h to 900m/h (1,640 to 2,953 LF/hr ) Roof Truss: 300m/h to 500m/h (984 to 1,640 LF/hr ) Floor Truss: 200m/h to 300m/h (656 to 984 LF/hr ) | |
| Machine Maximum Line Speed: | Up to 2100m/h ( 6,890 LF/hr ) | |
| Main Drive System: | SERVO Driven High Speed System | |
| Main Hydraulic System: | All Temperature Environment, High Power, High Speed System | |
| Machine Length/Width/Height: | 5000mm x 850mm x 1500mm ( 196.9” x 33.5” x 59.1”) | |
| Weight (Approximate): | 4800 kg (10500lb) | |
| Power Consumption / Supply: | 3 Phase 380 VAC 28 KW / 40 KVA (per client request) | |
| Profile Receiving System: | Standard Run-out table | |
| Powered De-Coiler: | 1,500 kg (3,300lb) Powered Variable Speed Coil Feeding System Maximum width: 300mm Maximum inner diameter: Ø450mm-520mm Maximum outer diameter: Ø1500mm | |
- Low Rise Residential Building Structures
- Mid Rise Residential Building Structures up to 4 Floors
- Student & Staff Accommodation Facilities up to 4 stories
- Floor & Roof Truss production
- Portable Buildings & Cabins
- Light Modular Building Structures
- Light Commercial and Industrial Building Structures
Multi-Profile Machine -16 Gauge (1.6mm)
X30i SystemMulti-Profile Machine 16 Gauge (1.6mm)
Multi-Profile Machine 12 Gauge (2.5mm)
Multi-Profile Machine 11 Gauge (3.0mm)
Single-Profile Machine 18 & 16 Gauge (1.2mm & 1.6mm)
X88 InfinityMulti-Profile Machine 9 Gauge (4.0mm)
X20 System: What It Does and Who It’s For
The x20 system is the productivity-focused multi-profile machine for interior systems and light residential framing at material up to 16 gauge (1.6 mm). Like every Pinnacle line, profiles leave the x20 system punched, dimple-lock ready and inkjet-labeled with their panel and position — downstream assembly is jig work, not measurement work, and one trained operator runs the line.
Who buys it: profile producers moving up to framing, fit-out contractors, and compact panel shops. PinnacleCAD converts approved structural models into panel drawings and machine files following AISI S100 design standards, so engineering feeds the x20 system in minutes rather than days of manual detailing. Every machine ships with factory acceptance testing, installation, operator training and remote diagnostics. That is the production standard the x20 system is built to hold, shift after shift.
Where it fits in the range: The X1 covers entry single-profile production. Step up to the X30i or X80i as your mix widens. For budget context see the steel framing machine price guide, and for the full technology picture the light gauge steel framing guide. Every x20 system commissioning follows the same fixed program worldwide.
Frequently Asked Questions
What does the X20 produce?
Punched, dimpled and labeled cold formed steel profiles ready for jig assembly — the productivity-focused multi-profile machine for interior systems and light residential framing at up to 16 gauge (1.6 mm). Output arrives at the bench panel-ready. It is the benchmark to hold any quote against when you evaluate the x20 system.
What is included with the X20?
PinnacleCAD software, factory acceptance test on your actual profiles, installation and calibration at your plant, operator training and first-production support, plus remote diagnostics for the life of the machine.
How many operators does the X20 need?
One trained operator supervises the line; two to four assemblers work the benches downstream. Most plants produce sellable output within two weeks of installation.
How do I choose between the X20 and other Pinnacle machines?
Choose by your heaviest planned section and profile mix. The X1 covers entry single-profile production. Step up to the X30i or X80i as your mix widens. Send us your profile mix for side-by-side production modeling.